Chromatography Fittings
IDEX Health & Science Upchurch PEEK Fingertight Fitting, for 1/16", 10-32, PEEK Blue -10 Pack
This item has a minimum order quantity of 10 packs per supplier requirements.
One Piece PEEK Fingertight Fitting, for 1/16", 10-32, PEEK Blue -10 Pack
Trajan Scientific VICI Valco Rotor Seal, Cheminert, 6 Port, Injection, 0.25mm, 2 Position, Rotor For C2/C3 Valco Valves: C2V-1006D-CTC, C2V-1006D, C3-1006D, C6-1006D, C2-1036D, or C2-1006D
VICI Valco Rotor, Cheminert, 6 Port, Injection, 0.25mm, Rotor For VICI Valco Valves: C2V-1006D-CTC, C2V-1006D, C3-1006D, C6-1006D, C2-1036D, or C2-1006D. Made in the USA.
Waters Corporation Column Support Clips, 10 per Pack
Column support clips are essential spare parts designed to be used as spacers at fluidic connections to the column, ensuring even heat dissipation. These clips are supplied in convenient packs of 10.
- Used as spacers at fluidic connections to the column.
- Ensures even heat dissipation.
- Supplied in a pack of 10.
Optimize Technologies ITB™ PTFE Plunger Seal, HP/Agilent 1050, 1100, 1200, 10pk
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, PTFE-based Improved PTFE Blend (ITB) seals are a superior choice for applications with elevated temperatures, high organic content, or when the broadest possible solvent compatibility is required. ITB™ seals tend to be softer than those made from UHMW-PE, making them more forgiving at high pressures where piston side-loading or misalignment may occur. This softer nature also leads to more shedding, but the ITB™ proprietary blend is designed to shed particles that are large enough to be caught at the surface of a standard 2µm frit, not embed within it. This item is equivalent to OEM part number 5063-6589.
Foxx Life Sciences EZwaste HPLC Solvent Waste System, Replacement Fittings, 1/4 Inch Hose Barb Fittings for 1/4 Inch ID Tubing, Black Fitting, 1/8 Inch MNPT Thread, 10/PK
330-0945-OEM: EZwaste Replacement Fittings, 1/8" MNPT, 1/4" HB, 10/pk. Foxx Life Sciences' replacement fittings secure waste tubes to carbos, providing the closed system necessary to prevent spills. The EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system features an activated carbon filter, which traps volatile organic compounds from being released into the air. This prevents chemicals from being inhaled by lab workers, and provides an easy mechanism of disposal for vapor wastes. The EZwaste Solvent Waste system also features a closed-loop design which protects against leaks and spills, improving overall lab safety.
![Optimize Technologies ITB™ PTFE Plunger Seal, Waters 225 µL Head (#3) [510, 590, 600/600E, 610, 650, 6K/6KA]](https://assets.fishersci.com/TFS-Assets/CCG/product-images/VN00025036-39-36-01214.JPG-250.jpg)
Optimize Technologies ITB™ PTFE Plunger Seal, Waters 225 µL Head (#3) [510, 590, 600/600E, 610, 650, 6K/6KA]
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, PTFE-based Improved PTFE Blend (ITB) seals are a superior choice for applications with elevated temperatures, high organic content, or when the broadest possible solvent compatibility is required. ITB™ seals tend to be softer than those made from UHMW-PE, making them more forgiving at high pressures where piston side-loading or misalignment may occur. This softer nature also leads to more shedding, but the ITB™ proprietary blend is designed to shed particles that are large enough to be caught at the surface of a standard 2µm frit, not embed within it. This item is equivalent to OEM part number WAT026644.
Bellco Glass, Inc. Compression Fitting, 5/16in. For 1/2 Hole"
Large flange headplate assemblies.Universal headplates fit 5l thru 36l vessels. MADE IN THE USA. Corrosion resistant 316l stainless steel.These thermowells are designed specifically for the Bellco control systems and fit through a 5/16" fitting on the stainless steel headplate. See the BCS section for complete listings. Probe adapters & compression fittings are designed using our standard 45 mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and do monitoring via insertion of these probes into the sidearms of vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200 mm stainless steel headplate or a 45 mm vertical sidearm.
Bellco Glass, Inc. Compression Fitting 2.5"
Bellco compression fittings are designed using our standard 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow ph and do monitoring via insertion of these probes into sidearms or vessels. 1/2" pipe thread screws directly into headplate. MADE IN THE USA.
![Optimize Technologies ITB™ PTFE Plunger Seal, 10mL S/SC Head [Gilson, Rainin HP, HPX, HPXL, SD200/300]](https://assets.fishersci.com/TFS-Assets/CCG/product-images/VN00025036-26-36-00630.JPG-250.jpg)
Optimize Technologies ITB™ PTFE Plunger Seal, 10mL S/SC Head [Gilson, Rainin HP, HPX, HPXL, SD200/300]
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, PTFE-based Improved PTFE Blend (ITB) seals are a superior choice for applications with elevated temperatures, high organic content, or when the broadest possible solvent compatibility is required. ITB™ seals tend to be softer than those made from UHMW-PE, making them more forgiving at high pressures where piston side-loading or misalignment may occur. This softer nature also leads to more shedding, but the ITB™ proprietary blend is designed to shed particles that are large enough to be caught at the surface of a standard 2µm frit, not embed within it.
Waters Corp Waters Seal Removal Tool, Plastic End, HPLC System
The Seal Removal Tool is designed to safely remove seals from various pump heads, specifically within HPLC systems. It features both metal and plastic ends, ensuring that plunger seals can be extracted without scratching or damaging the sealing surfaces, unlike conventional tools.
- Designed to remove plunger seals from pump heads.
- Features a plastic end to prevent scratching of sealing surfaces.
- Compatible with O-ring energized and spring-energized seals for various pump types.
- Equipped with both metal and plastic screw ends for versatile seal removal procedures.
- Prevents damage to pump head surfaces during seal extraction.
- Used with HPLC systems.